Share

EDMO PDT 200/100

This is a 2 stage hydraulic jack powered by an air pump. It is operated from the handle, well clear of the load. The jack is power up and power down. The EDMO PDT200/100 Jack comes fitted with the selfdrive EDMOtivator unit, to assist in moving the unit into position.

Safety is a feature of the PDT200/100 having a pilot operated lowering control valve which requires the jack to be pumped down, thus providing protection against a free fall and gives complete control over the lowering process.

When jacking, protection is provided against overloading by pressure relief valves. Protection is also provided in the unlikely event of tube or fitting failure in the form of hydraulic fuses, which are activated by excessive flow such as a broken pipe or fitting.

  • Working Load Limit 1st stage: 150,000kgs
  • Working Load Limit 2nd stage: 75,000kgs
  • Closed height: 617mm
  • Raised height 1st stage: 955mm
  • Raised height 2nd stage: 1295mm
  • Estimated Weight: 550kgs

EDMO PDT 200/100 is compatible with the following vehicle models:

785D, 789D, 793F, 794AC, 795F, 930E-5, 960E-2, 980E-4, EH4000AC-3, EH4500-2, EH5000AC-3, MT3700, MT4400

Similar PRoducts

EDMO LL10AL Lift ‘n’ Lock

EDMO LL12AL Lift ‘n’ Lock

EDMO UPDT 100/50

EDMO PDT 200/100

EDMO TPDT 150/75

EDMO MPDT100/50

Enquiry for

EDMO PDT 200/100