PH: 61 + 7 55912400
FAX: 61 + 7 55912210

Email: sales@edmo.com.au
Website: http://www.edmo.com.a

Hydraulic Jacks - comply with AS/NZ2693

Any application for a heavy duty safe jacking device can be, and is, met by EDMO range of Jacks. As with the tyre presses, the jacks can be operated by one person, being extremely easy to manoeuvre. EDMO Jacks cover the complete requirement for heavy Earthmover vehicles, Dozers, Loaders and indeed any where there is a need for a heavy duty safe jacking device, and have also been very popular overseas. All theJjacks have safety shut off valves, which prevent the Jack from collapsing in the event of an accident. The Jack is entirely operated from the handle and therefore there is no need for the operator to be under the load when jacking. (This is a requirement of Australian Standard No.2693). The only source of power required for the jacks, which range in capacity from 25 to 250 tonnes, is a 100 to 120 PSI air supply. EDMO jacks can also be made to order or customised to meet specific purpose requirements.

LIFT'n'LOCK a combined hydraulic jack and stand - (patented). The unit is a one piece machine, operated in the same manner as a conventional EDMO Jack. When the desired height is reached a mechanical locking arrangement locks the Jack in the desired position preventing accidental retraction.

The LIFT'n'LOCK Jack/Stand can be manufactured to specific dimensions and is adjustable in increments of 35mm. Lift'n'Lock complies with both Australian Standards Vehicle Jacks AS/NZ 2693 and Vehicle Support Stands AS2538.

While all Jacks come with Dollies as stated, we supply as an optional extra a SWIVEL DOLLIE which will accommodate up to a 10 degree angle with 360 degree rotation. The circular grooved top is hardened to enable grip. These dollies will fit directly into the top of the EDMO Jacks or Extension Dollies.

The EDMOTIVATOR is a recently developed addition to the EDMO Jack: see Other Products.

EDMO Jack Specifications

A: Closed Height with Cap Dollie B: Raised Height with Cap Dollie C: Raised 2nd Stage & Cap Dollie D: Raised Height with Standard Extn (Supplied with Jack & Cap Dollie) E: Overall Dimension F: Front of Base to Axle Dimension G: Base Width H: Axle Width J: Overall Height at Handle

Note: * Height includes Flat or Dished Cap Dollie.
Only one extension dollie should be used in any operation along with a Flat or Dished Cap Dollie.

SINGLE STAGE JACKS - STANDARD MODEL SPECIFICATIONS

MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT*: STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO DM5 SINGLE STAGE POWER UP & DOWN 50,000 kgs 420mm 640mm 150mm SUPPLIED WITH JACK 200mm 10° Angle Around 360°

MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT*: STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO DM7 SINGLE STAGE POWER UP & DOWN 75,000 kgs 420mm 640mm 150mm SUPPLIED WITH JACK 200mm 10° Angle Around 360°

MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT*: STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO DM10 SINGLE STAGE POWER UP & DOWN 100,000 kgs 637mm 1018mm 250mm SUPPLIED WITH JACK 200mm, 300mm, 400mm, 450mm 10° Angle Around 360°

MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT*: STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO DM15 SINGLE STAGE POWER UP & DOWN 150,000 kgs 647mm 1015mm 250mmSUPPLIED WITH JACK 200mm, 300mm, 400mm, 450mm 10° Angle Around 360°

MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT*: STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO DMA200 SINGLE STAGE POWER UP & DOWN 200,000 kgs 651mm 1018mm 250mm SUPPLIED WITH JACK 200mm, 300mm, 450mm 10° Angle Around 360°

TELESCOPIC JACKS- STANDARD MODEL SPECIFICATIONS

MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT* 1st EXTENDED HEIGHT* 2 nd STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO LPDT55/25 TELE. STAGE POWER UP & DOWN 55,000 kgs Stage 1, 25,000 kgs Stage 2 250mm 378mm 490mm 200mm SUPPLIED WITH JACK 250mm, 300mm 10° Angle Around 360°

MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT* 1st EXTENDED HEIGHT* 2 nd STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO MPDT100/50 TELE. STAGE POWER UP & DOWN 100,000 kgs Stage 1, 50,000 kgs Stage 2 620mm 955mm 1300mm 200mm SUPPLIED WITH JACK 250mm, 300mm, 400mm, 450mm 10° Angle Around 360°   MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: RAISED HEIGHT: STANDARD EXTENTION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO DMA250 Single Stage power up & down 250,000kgs 651mm 1015mm 250mm 300mm & 400mm 10° Angle Around 360°

MODEL: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT* 1st EXTENDED HEIGHT* 2 nd STANDARD EXTENSION: OPTIONAL EXTENSIONS: EDMO UPDT100/50 100,000 kgs Stage 1, 50,000 kgs Stage 2 300 mm 450mm 595mm 200mm SUPPLIED WITH JACK 300mm, 400mm, 450mm MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT* 1st EXTENDED HEIGHT* 2 nd STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO TPDT150/75 TELE. STAGE POWER UP & DOWN 150,000 kgs Stage 1, 75,000 kgs Stage 2 615mm 956mm 1299mm 200mm SUPPLIED WITH JACK 250mm, 300mm, 400mm 10° Angle Around 360°

MODEL: TYPE: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT* 1st EXTENDED HEIGHT* 2 nd STANDARD EXTENSION: OPTIONAL EXTENSIONS: OPTIONAL SWIVEL DOLLIE: EDMO PDT200/100 TELE. STAGE POWER UP & DOWN 200,000 kgs Stage 1, 100,000 kgs Stage 2 746mm 1181mm 1635mm NIL SUPPLIED WITH JACK 150mm, 200mm 10° Angle Around 360°

LIFT'N'LOCKS- STANDARD MODEL SPECIFICATIONS

MODEL: CAPACITY(SWL): CLOSED HEIGHT with cap: RAISED HEIGHT of last lock: FULL RAISED HEIGHT with cap: MODEL: CAPACITY(SWL): CLOSED HEIGHT*: EXTENDED HEIGHT* MODEL: CAPACITY(SWL): CLOSED HEIGHT with cap: RAISED HEIGHT of last lock: EDMO LL5A 50,000kgs 580mm 935mm 955mm EDMO LL5RA 5 0,000 kgs 350mm 540mm EDMO KRESS LL5RA Lift'n'Lock 50,000 kgs 590 mm 977 mm